Sorry for the lack of updates.
The decal was completed a few nights ago and below is the finished product for the decal stage.
I only post the photos of the decal near the nose of the Tornado, since this is where the most decal is located..
As i mentioned before, the decal is a bit thick and a few layers of Future Floor Polish was used to make the decal stay on the kit... pretty tedious job.
I also have a few occasion where the decal peel out but luckily a coat of Future somehow solved the problem.
Noticed also that the ared near the gun-vent (in the middle of the shark teeth) need to be touch-up with a paint, which i already done.
Next step is to "wash" (dirty) the plane up using Promodeller "Dark" wash...
until next update..